- Nowadays, for lots of people, the initial point they do after purchasing a new vehicle is to retrofit the front lights, it is not only for t
Nowadays, for lots of people, the initial point they do after purchasing a new vehicle is to retrofit the front lights, it is not only for the fashionable appearance but likewise for the quest of character. In fact, the street light on the road now is brighter compared to in the past. Yet a brighter as well as common headlight suggests far better presence experience and also more secure driving on road. So when I obtain my brand-new Carola, my very first choice is to update the manufacturing facility halogen headlight to HID package with bi-xenon projector. The actions are shown listed below.
I took the bumper out off to yank the front lights off of the assemblies as well as prepared for dissection. Baked them in the stove as well as took the shrouds off.
Afterwards it was some screws in the real estate then I started to pierce some little holes in the reduced beam of light headlight base.
Mounted the YEAKY bi-xenon projector in the housing and also examination the light on the housing. After completing the light test, fixed the YEAKY bi-xenon in the housing with steel-soil.
Seal the housing with glue to avoid leakage. And then heat the adhesive in a consistent temperature. So the front lights housing can stick to the base closely, and also installed the screws at the very same time.
When all the things are totaled the automobile, we fit the custom-made AOZOOM rapid ballast for the bi-xenon projector.
The light is brighter as well as clearer than I expect with the low beam of light.